FEEL BETTER. TRAVEL FARTHER.
How to
If you have any questions on how to install, maintain or clean your Shockwave suspension products, you will find instructions and videos here.
Should you have any further questions, please call 1.778.426.8544 to reach our customer service.
How to set up a Shockwave S5-SS
This video will describe the steps to set up a Shockwave S5-SS suspension base and how to make on-the-fly adjustments.
How to set up a Shockwave S5-AL
This video will describe the steps to set up a Shockwave S5-AL suspension base and how to make on-the-fly adjustments.
How to set up a Shockwave S5-LW
This video will describe the steps to set up a Shockwave S5-LW suspension base and how to make on-the-fly adjustments.
How to install an S5 Corbin seat onto a Shockwave S5
This video will describe the steps to install an S5 Corbin seat onto a Shockwave S5 suspension base.
How to install a Shockwave suspension base onto a riser box
This video will describe the steps to install a Shockwave suspension base onto a riser box.
How to install a Shockwave Swivel Slide
This video will describe the steps to install a Shockwave Swivel Slide onto a Shockwave S5 suspension base.
How to install a Shockwave Slide
This video will describe the steps to install a Shockwave Slide onto a Shockwave S5 suspension base.
How to install a Shockwave Swivel
This video will describe the steps to install a Shockwave Swivel onto a Shockwave S5 suspension base.
How to install a Shockwave Adapter Plate
This video will describe the steps to install a Shockwave Adapter Plate to fit a seat with a 5in x 12in bolt pattern onto a Shockwave slide, swivel or swivel/slide.
How to install a shock extender onto a Shockwave S5-AL
This video will describe the steps to install a shock extender onto a Shockwave S5-AL suspension base.
How to replace a Bushing on a Shockwave Slide
This video will describe how to install a replacement bushing onto a Shockwave slide.
Two important habits for daily maintenance of your S5 suspension base
This video explains the importance of regular checking of your shock pressure and making sure that the pump is detatched before using the seat.
Cleaning & Maintenance of your S5 Suspension Base
S5 Cleaning & Maintenance Instructions
- Using a soft cloth, wipe all surfaces of the S5 Suspension Base with fresh water. Open deck boats can hose off the suspension bases if needed.
- Allow to dry
- Spray LPS1, SaltAway (or equivalent) corrosion inhibitor on terry or microfiber cloth and wipe all metallic and painted surfaces and hardware.
- Ensure all areas surrounding bolt heads and nuts are thoroughly cleaned and lubricated to decrease chance of corrosion
- Gently wipe shock shaft with a thin layer of LPS1, SaltAway (or equivalent) corrosion inhibitor. Clean off excess to avoid particulate from sticking to the shock shaft during operations.
- All accessories (slide, swivel slide) can have LPS1, SaltAway or equivalent applied.
- Application of LPS1/SaltAway should occur after every trip or once every 30 days.
- Wipe Corbin2 or S5 Seats with Marine grade upholstery cleaner.
- *Optional: All bolt heads and nuts can be coated with LPS3 if desired for added corrosion resistance.
LPS1, SaltAway and LPS3 are the products that we recommend to use. If you cannot find them, please use an equivalent.
Shockwave Leak Test Procedure
Pro Product Leak Test
- TOOLS NEEDED: 1. Shock Pump 2. Spray Bottle with Soap and Water 3. Schrader-Valve Stem Tool 4. 1/8” Allen Key 5. 14mm Wrench 6. Loctite (242) Blue 7. Loctite (5452) Red
- Checking the EVOL: Remove the Schrader-valve cover as seen. Using the shock pump, test to see if the internal pressure is at standard pressure. If not, fill the shock before continuing. Using the soap filled spray bottle, spray the solution liberally over the valve and its fill stem. If a leak is present soap bubbles will form around the leaking component. If the stem is leaking replace using the Schrader-valve stem tool and a new Schrader-valve stem. If no leaks are found move on to step 2. Note: The Schrader valve stem is a common source of leaks.
- Checking the Airline: Using the 1/8” Allen key, remove the fasteners securing the rear panel as seen. With the rear panel removed, spray the soapy water solution along the hose and at the indicated locations. Inspect closely to see if any bubbles have formed along the air connections. If a leak is found at either of the fittings, use the 14mm wrench to tighten the fitting a quarter turn. If the leak persists, remove the suspected fitting and inspect any O-rings for wear or damage. Finally, install needed replacement components ensuring to apply Loctite 5452 thread sealant to the threads of the fitting(s). Should a leak be found in the hose, replace in its entirety.
- Reassembly: Start by inserting the hose into the white plastics clips on the rear panel as shown. Next re-attach the rear cover and fasteners with the 1/8” Allen key, ensuring to apply Loctite 242 to each fastener. With the rear-cover re-installed, pump the shock to standard pressure.
- In the case where leaks are undetectable, use the shock isolation procedure to eliminate the shock as a source of any leaks, and replace the hose. Take the Shrader valve (if it is in good condition) and connect it directly to the shock, to allow the continued use of the seat until the spare parts arrive.
- Download the Shockwave PRO Suspension Leak Test Procedure here
Rec Product Leak Test
- TOOLS NEEDED: 1. Shock Pump 2. Spray Bottle with Soap and Water 3. Schrader-Valve Stem Tool
- Step 1 - Checking for Leaks: Start by removing the Schrader-valve cover. Use the shock pump to pressurize the shock to 100 PSI. Should a leak persist, use the spray bottle with the soap solution to spray both the Schrader-valve and the entire body of the shock. If there is a leak on either of these parts bubbles should form around the leak.
- Part Replacement: If a leak is found at a Schrader valve, a valve stem tool must be used to remove the old core and install a new one to ensure a proper seal and prevent further leakage. If a significant leak is found on the body, replace the entire shock. Note: A Shock body leak is extremely rare.
- Download the Shockwave REC Suspension Base Leak Test Procedure here
Provide us with your contact information, description, part number, optional equipment and quantity required for the product you wish to purchase. We will return a current price quote within 24 hrs.